Do it yourself
Frequently asked questions about cars and motorcycles

Model: Gilera Saturno 350
Part: Pump

The water pump installed on the Gilera Saturno 350 can be removed by loosening the screws that fix the left side of the engine block, so that it is possible to access the underlying components: here it will be possible to find the timing chain and the water pump. By unscrewing the screws that fix the water pump and removing its pulley, it will be possible to remove the pump from its housing and subsequently replace it with a new spare part. After the replacement, it will be possible to verify that everything works smoothly.

Posted on 15 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Saturno 350 To replace the water pump on a Gilera Saturno 350, loosen the screws securing the left side of the engine block to gain access to the underlying comp…
Saturno 350 The procedure for replacing the water pump on the Gilera Saturno 350 involves unscrewing the bolts that secure the seat, removing it. Next, it will b…
Saturno 350 To replace the water pump on a Gilera Saturno 350, you need to unscrew the bolts securing the seat and remove it. Next, you can loosen and disconnect…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos