Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a KTM RC 125

Model: Ktm Rc 125
Part: Air filter

Video tutorial

This guide will show you how to remove and replace the air filter of the engine on the KTM RC 125 motorcycle, as well as the Duke 125. First, place the motorcycle on a stand and begin by removing the rider's seat and the fuel tank cover by unscrewing the fixing screws; then remove the cover of the air filter box, taking out and replacing the cartridge with a new one, as shown in the video.

At this point, correctly install the new air filter, inserting it in the correct orientation, then reattach the tank cover and secure the seat!


Updated on 8 August 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on a KTM RC 125
Replacing the Air Filter on a KTM RC 125
Rc 125 In this tutorial, we will cover the main instructions on how to remove and replace the engine air filter on a KTM RC 125, as well as on the 250 and 3…
How to Replace the Air Filter on the KTM RC-125
How to Replace the Air Filter on the KTM RC-125
Rc 125 To replace the air filter on the KTM RC-125, loosen the screws securing the side panels of the motorcycle located near the fuel tank. Once the side p…
How to replace the engine oil in the KTM RC 125?
How to replace the engine oil in the KTM RC 125?
Rc 125 Replacing the motor oil in the KTM RC 125, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make sure that t…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos