Do it yourself
Frequently asked questions about cars and motorcycles

Model: Gilera Nexus 500
Part: Wheel

In this video tutorial, follow the main instructions to remove the rear wheel of a Gilera Nexus 500. First, position the central stand on your scooter and unscrew the bolts of the silencer bracket to remove it; then unscrew the additional bolts located on the frame, as shown in the video. At this point, remove the split pin from the wheel nut using pliers and unscrew the central nut with a socket spanner; then unscrew the five bolts of the wheel and take it off!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Nexus 500 In this tutorial, you will learn how to remove the rear wheel of a Gilera Nexus 500. First, remove the exhaust cover by unscrewing the screws; then, …
Nexus 500 Below are the instructions for removing and replacing the engine block of the Gilera Nexus 500 scooter. First, place your scooter on the centre stand…
Nexus 500 This guide outlines the steps necessary to remove and replace the clutch bell on the Gilera Nexus 500 scooter, following the instructions below. Firs…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos