Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Nexus 500
Part: Engine

Below are the instructions for removing and replacing the engine block of the Gilera Nexus 500 scooter. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the fixing screws; then unscrew the central nut of the rear wheel, as illustrated in the video. At this point, disconnect the suspension and remove the engine support pin; disconnect the electrical wiring and fuel lines to remove the engine block, following the video tutorial to the end!

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Gilera Nexus 500?
How do you disassemble the engine of the Gilera Nexus 500?
Nexus 500 In order to disassemble the engine of the Gilera Nexus 500, you have to completely remove it from its housing, unscrewing the screws that fix it to t…
Replacing Glove Box Light Bulb on Gilera Nexus 500
Replacing Glove Box Light Bulb on Gilera Nexus 500
Nexus 500 In this short video tutorial, you will see instructions on how to remove and replace the light bulb of the glove box (the one under the seat) on a Gi…
Guide to Replacing the Rear Shock Absorber on the Gilera Nexus 500
Guide to Replacing the Rear Shock Absorber on the Gilera Nexus 500
Nexus 500 Discover the main steps to remove and replace the rear shock absorber on the Gilera Nexus 500 scooter in this guide. First, place the scooter on its …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos