Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the engine of the Gilera Nexus 500?

Model: Gilera Nexus 500
Part: Engine

Video tutorial

In order to disassemble the engine of the Gilera Nexus 500, you have to completely remove it from its housing, unscrewing the screws that fix it to the appropriate supports and disconnecting all the pipes and connectors: in this way it will be possible to proceed by loosening the screws that fix the cylinder again and removing it together with the underlying piston.

This must be detached from its connecting rod so that it is then possible to access the crankshaft and all the components below: by replacing them it will be possible to reassemble the engine to verify that everything is functioning.


Posted on 27 April 2025 by ScegliAuto


Related tutorials

How to Remove the Clutch Bell on a Gilera Nexus 500
How to Remove the Clutch Bell on a Gilera Nexus 500
Nexus 500 This guide outlines the steps necessary to remove and replace the clutch bell on the Gilera Nexus 500 scooter, following the instructions below. Firs…
How to Bleed the Brakes on a Gilera Nexus 500
How to Bleed the Brakes on a Gilera Nexus 500
Nexus 500 To bleed the brakes on a Gilera Nexus 500, open the compartment located near the knob by unscrewing the screws that secure the cover. Once opened, in…
How to Change the Engine Oil and Oil Filter on the Gilera Nexus 500
How to Change the Engine Oil and Oil Filter on the Gilera Nexus 500
Nexus 500 Briefly review the main steps to perform the routine maintenance service by replacing the engine oil and oil filter on the Gilera Nexus 500 scooter. …

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos