Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Clutch Bell on a Gilera Nexus 500

Model: Gilera Nexus 500
Part: Clutch

Video tutorial

This guide outlines the steps necessary to remove and replace the clutch bell on the Gilera Nexus 500 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the fixing screws of the left side cover to access the transmission.

Next, unscrew the central nut of the fan, followed by the one on the pulley, as shown in the video. At this point, remove the clutch pack and the bell, replacing them if necessary with new ones.

Apply the reverse procedure for reassembly!


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rollers and Variator on the Gilera Nexus 500
How to Replace the Rollers and Variator on the Gilera Nexus 500
Nexus 500 Here are the steps to remove and replace the rollers and variator on the Gilera Nexus 500 scooter. First, place the scooter on its centre stand and s…
How to Remove the Engine Block from the Gilera Nexus 500
How to Remove the Engine Block from the Gilera Nexus 500
Nexus 500 Below are the instructions for removing and replacing the engine block of the Gilera Nexus 500 scooter. First, place your scooter on the centre stand…
How to Replace the Variator on the Gilera Nexus 500
How to Replace the Variator on the Gilera Nexus 500
Nexus 500 In this video tutorial, you will learn how to disassemble and replace the variator on the Gilera Nexus 500 scooter, following the instructions below.…

How to Replace the Exhaust on the Sherco SEF-R 450?

To replace the exhaust on the Sherco SEF-R 450, loosen the screws securing the side panel of the mudguard on its right side. Once this panel is completely removed, you can locate the underlying exhaust, which must be freed from its housing by unscrewing the appropriate screws. After the support screws are removed, widen the ring connecting the exhaust to the exhaust manifold, and then you can completely remove it. This will allow you to insert the new exhaust and check its operation.

Watch the video!


by ScegliAuto

More videos