Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rollers and Variator on the Gilera Nexus 500

Model: Gilera Nexus 500
Part:

Video tutorial

Here are the steps to remove and replace the rollers and variator on the Gilera Nexus 500 scooter. First, place the scooter on its centre stand and start by removing the side cover of the transmission; to do this, unscrew the side fastening screws, as shown in the video.

Next, remove the fan by unscrewing the central nut, then take off the clutch bell and the drive belt; then remove the variator, taking out the old rollers inside it. Now install the new variator along with the rollers, reassembling the transmission!


Updated on 20 June 2026 by ScegliAuto


Related tutorials

Replacing the Belt and Variator on the Gilera Nexus 500
Replacing the Belt and Variator on the Gilera Nexus 500
Nexus 500 In today's video, we will see the instructions that will allow us to disassemble and replace the drive belt and variator on the Gilera Nexus 500 scoo…
How to Replace the Variator on the Gilera Nexus 500
How to Replace the Variator on the Gilera Nexus 500
Nexus 500 In this video tutorial, you will learn how to disassemble and replace the variator on the Gilera Nexus 500 scooter, following the instructions below.…
Disassembly of Variator and Rollers on Gilera Nexus 500
Disassembly of Variator and Rollers on Gilera Nexus 500
Nexus 500 In this video tutorial, you will learn how to disassemble the variator along with its rollers from a Gilera Nexus 500 scooter. First, remove all the …

Removing and Replacing the Battery of the Harley Davidson Iron 883

In this video, follow the instructions to remove and replace the battery of the Harley Davidson Iron 883. First, place your motorcycle on the stand and remove the rider's seat. Next, disconnect the electrical connector located on the side and undo the fixing screw of the battery bracket using a socket spanner with an extension, as shown in the video. At this point, disconnect the battery wiring to remove it and replace it with the new one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos