Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Bleed the Brakes on a Gilera Nexus 500

Model: Gilera Nexus 500
Part: Checks and maintenance

Video tutorial

To bleed the brakes on a Gilera Nexus 500, open the compartment located near the knob by unscrewing the screws that secure the cover. Once opened, insert a tube into the bleed valve on the brake caliper; by opening the valve, you can collect the brake fluid in a container.

When all the fluid has drained, you can insert the new brake fluid through the previously opened bleed valve by removing the cover next to the knob.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Filter on a Gilera Nexus 500?
How to Replace the Oil Filter on a Gilera Nexus 500?
Nexus 500 To replace the oil filter on the Gilera Nexus 500, locate it at the central lower part of the bike: grip the filter and turn it anti-clockwise to com…
How to Replace the Exhaust on a Gilera Nexus 500?
How to Replace the Exhaust on a Gilera Nexus 500?
Nexus 500 To replace the exhaust on a Gilera Nexus 500, loosen the screws that secure the exhaust end can to its housing, located near the rear wheel on the ri…
How do you disassemble the engine of the Gilera Nexus 500?
How do you disassemble the engine of the Gilera Nexus 500?
Nexus 500 In order to disassemble the engine of the Gilera Nexus 500, you have to completely remove it from its housing, unscrewing the screws that fix it to t…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos