|
Do it yourself
| |||
| ||||
|
Model: Gilera Nexus 500
To replace the exhaust on a Gilera Nexus 500, loosen the screws that secure the exhaust end can to its housing, located near the rear wheel on the right side of the bike. Once the fixing screws of the supports are loosened, you can widen the ring that connects the exhaust to the exhaust pipe. Once the exhaust is freed, insert the new one into its housing: it must be connected to the appropriate supports and secured with the fixing ring, ensuring everything functions correctly.
Updated on 10 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Nexus 500
To check the engine oil level on the Gilera Nexus 500, locate the dipstick that allows monitoring. This is found on the right side of the bike, low d…
Nexus 500
This guide outlines the steps necessary to remove and replace the clutch bell on the Gilera Nexus 500 scooter, following the instructions below. Firs…
Nexus 500
To replace the front shock absorber of the Gilera Nexus 500, you first need to remove the corresponding wheel by loosening the bolts that secure the …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |