Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Starter Motor on the Gilera Nexus - Aprilia SR Max 300

Model: Gilera Nexus 300
Part: Starter motor

This video is currently unavailable

This guide will show you how to dismantle and replace the starter motor on the Gilera Nexus 300, as well as on the Aprilia SR Max, following the instructions below. First, locate the starter motor, which is situated above the engine, specifically near the intake manifold; then disconnect the power connector by unscrewing the securing nut. At this point, unscrew the two screws of the starter motor to remove it and replace it with the new one; apply the reverse procedure for reassembly!


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust of the Gilera Nexus 300?
How to Replace the Exhaust of the Gilera Nexus 300?
Nexus 300 To replace the exhaust on the Gilera Nexus 300, loosen the screws that secure it to its housing, located near the rear wheel on the right side of the…
How to Install the Thermoshield on the Gilera Nexus 300
How to Install the Thermoshield on the Gilera Nexus 300
Nexus 300 Today, follow these simple steps to install the thermoshield on the Gilera Nexus 300. First, place the scooter on the centre stand and position the t…

How to Change the Engine Oil of the Triumph Trophy 900

To change the engine oil of the Triumph Trophy 900, first, remove the drain plug located at the central lower part of the bike. Once the plug is loosened, collect all the used oil in a suitably positioned container. Next to the drain plug, you will also find the oil filter, which needs to be removed and replaced with a new part. After completing these steps, top up the oil through the breather located on the left side of the bike.

Watch the video!


by ScegliAuto

More videos