Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to install the exhaust of the Gilera Nexus 300, you need to loosen the screws that fix it to its housing, near the rear wheel on the right side of the motorcycle: once the support screws have been loosened, you can proceed by widening the connecting clamp between the exhaust and the exhaust manifold. This way you can remove the old exhaust from its seat, insert the new one and connect it properly; after installation, you can secure it to the respective supports to ensure that everything is working properly.

Posted on 19 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replace the Starter Motor on the Gilera Nexus - Aprilia SR Max 300
Nexus 300 This guide will show you how to dismantle and replace the starter motor on the Gilera Nexus 300, as well as on the Aprilia SR Max, following the inst…
How to Install the Thermoshield on the Gilera Nexus 300
How to Install the Thermoshield on the Gilera Nexus 300
Nexus 300 Today, follow these simple steps to install the thermoshield on the Gilera Nexus 300. First, place the scooter on the centre stand and position the t…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos