Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Exhaust and Wheel on the Gilera Runner 50

Model: Gilera Runner 50
Part: Wheel

Video tutorial

In today's tutorial video, you will learn how to remove and replace the exhaust and wheel on the Gilera Runner 50 scooter by following these simple steps. First, place the scooter on its centre stand and start by unscrewing the bolts of the exhaust silencer bracket; then remove the nuts from the collector to take it off completely.

At this point, unscrew the central bolts of the wheel to remove it; this way, you can also replace the tyre if necessary. Finally, reassemble everything by applying the reverse procedure of disassembly!


Updated on 29 May 2026 by ScegliAuto


Related tutorials

Runner 50 In this tutorial video, you will learn how to remove the exhaust from a Gilera Runner SP scooter, following the steps outlined below. First, unscrew …
Runner 50 To replace the stator of the Gilera Runner 50, you need to loosen the screws that secure the circular cover panel located on the right side of the bi…
Runner 50 To replace the Gilera Runner 50 transmission, loosen the screws securing the casing near the rear wheel on the left side of the bike. Once the bolts …

How to Change the Engine Oil of the Triumph Trophy 900

To change the engine oil of the Triumph Trophy 900, first, remove the drain plug located at the central lower part of the bike. Once the plug is loosened, collect all the used oil in a suitably positioned container. Next to the drain plug, you will also find the oil filter, which needs to be removed and replaced with a new part. After completing these steps, top up the oil through the breather located on the left side of the bike.

Watch the video!


by ScegliAuto

More videos