Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Gilera
    3. : Vc 150 : How to replace the engine oil and the oil filter on the Gilera VC 150

Model: Gilera Vc 150
Part: Engine oil
How to replace the engine oil and the oil filter on the Gilera VC 150

Let's see below in this short and simple guide, the steps on how to carry out the routine maintenance coupon, replacing the engine oil and cleaning the oil filter, of the Gilera VC 150 motorcycle. First of all, we put our motorcycle on the stand and start unscrew the oil vent bolt located under the engine, making it drain into a container for about ten minutes; then we unscrew the screw of the small oil filter, cleaning it. Finally, unscrew the filler cap and top up, using the oil suitable for our engine (indicated in the booklet).


Posted on 28 December 2022 by ScegliAuto

Replacement of the speed sensor of the KTM Duke 125

Today's guide will show us how to disassemble and replace the speed sensor of the KTM Duke 125 motorcycle. First, let's locate the sensor, which is fixed on the front wheel fork; then we unscrew the sensor mounting screws to remove it, disconnecting it along with the wiring, as shown in the video. At this point, we pass the new cable with the speedometer sensor, making the electrical connection and fixing it correctly on the wheel; we then verify the operation of the speed sensor, ensuring with a GPS that it is calibrated correctly.

Watch the video!


by ScegliAuto

More videos