Do it yourself
Frequently asked questions about cars and motorcycles
To replace the transmission on the Gilera Runner 50, loosen the screws that secure the cover on the left side of the rear wheel: once these screws are loosened, you can remove the cover to access the components inside. Here, you can remove the nut that secures the central pin of the variator and clutch, allowing you to remove them along with the drive belt. Once all these components are removed, you can install the new ones and cover everything with the transmission cover.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Runner 50 This guide outlines the steps to remove and replace the drive belt of the Gilera Runner 50 scooter. First, place the scooter on the centre stand and …
Runner 50 To replace the transmission on a Gilera Runner 50, first loosen the screws securing the cover on the left side of the rear wheel. Once these screws a…
Runner 50 This guide provides instructions on how to change the transmission oil of the Gilera Runner 50 two-stroke scooter. First, place your scooter on the c…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos