|
Do it yourself
| |||
| ||||
Model: Gilera Dna 50
To replace the transmission on a Gilera DNA, open the transmission casing by unscrewing the fixing screws of its cover. The casing is located near the rear wheel of the bike, on the left side. Once opened, unscrew the screws that secure the clutch bell and the variator, removing them from their housing along with the belt. This will allow you to insert the new components, positioning the belt around them. Finally, cover everything with the casing.
Updated on 24 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Dna 50
To replace the water pump on a Gilera DNA 50, you must completely disassemble the transmission cover along with the related components inside. On the…
Dna 50
In order to replace the transmission of the Gilera DNA 50, you need to loosen the screws that secure the specific casing, located on the left side of…
Dna 50
To replace the transmission on the Gilera DNA 50, loosen the screws securing the cover near the rear wheel on the left side of the bike. Once the cov…
|
How to Remove the Rear Wheel on the BMW G650 GS?
In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.062
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |