Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Model: Gilera Dna 50
Part: Transmission

In order to replace the transmission of the Gilera DNA 50 it is necessary to loosen the screws that secure the casing located in the rear part of the bike, in correspondence with the rear wheel. Once the casing has been opened, it will be necessary to loosen the nut that fixes the central pin of the variator, so that the latter is removed; by also removing the clutch bell, it will be possible to remove the discs that compose it and also the belt, replacing everything with new spare parts. After all the parts have been re-installed, the cover can be closed with its screws.


Posted on 27 June 2024 by ScegliAuto



How do you replace the transmission of a Gilera DNA?
Dna 50 Replacing the transmission of the Gilera DNA is done by opening the transmission housing itself: to do this, it will be necessary to unscrew the fixi
How do you replace the transmission of the Gilera DNA 50?
Dna 50 The replacement of the transmission on the Gilera DNA 50 is carried out by loosening the screws that fix the casing at the rear wheel, on the left si
How do you replace the air filter on the Gilera DNA 50?
Dna 50 In order to replace the air filter on the Gilera DNA 50 you have to loosen the screws that secure the casing at the rear wheel, on the left side and

How to change the motor oil of a KTM Duke 390?

To change the motor oil on a KTM Duke 390, start by placing the motorcycle on a stable stand to ensure it is in a vertical position. Under the engine, locate the oil drain plug and remove it with the appropriate wrench, allowing the used oil to completely drain into a suitable container. Once the oil has completely drained, screw the drain plug back on and tighten it properly. Next, locate the oil fill opening on the engine and fill it with the recommended new oil, using a funnel to prevent spills. Check the oil level to make sure it is correct, adding more oil if necessary. After completing the filling, start the engine and let it run for a few minutes to distribute the new oil. Finally, turn off the engine and check the oil level again, adding more if needed.

Watch the video!


by ScegliAuto

More videos