Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Gmc Canyon
    4. : Checks and maintenance

GMC Canyon - Checks and maintenance

GMC Canyon (2015-2022 / MK 2)
How to install a led on the GMC Canyon step
If you want to install LEDs also on the rear step of your GMC Canyon, get the pieces and 10 and 7 mm T-wrenches. First you will have to disassemble the step by …read all…
Posted on 26 August 2022 by ScegliAuto
GMC Canyon (2015-2022 / MK 2)
How to install a grille in place of the GMC Canyon front end
How to replace the front end of your GMC Canyon with an aggressive chrome grille. We have to remove the whole front by working on the screws that are under the …read all…
Posted on 30 November 2022 by ScegliAuto
GMC Canyon (2004-2012 / MK 1)
How to reset the oil service in the GMC Canyon?
After changing the oil and filter in the GMC Canyon, we will have to manually reset its life and the warning light on the dashboard. In this tutorial we can …read all…
Posted on 1 July 2022 by ScegliAuto
GMC Canyon (2004-2012 / MK 1)
How to reset the oil service in GMC Canyon?
In this tutorial we can see how to reset the oil service in the GMC Canyon pick-up, a very simple and fast operation, to be performed only after completing all …read all…
Posted on 5 May 2024 by ScegliAuto
Battery (2) Bodywork (2) Key (3) Checks and maintenance (4) Brake discs (1) Air filter (2) Headlight bulb (1) Rear light bulb (1) Interior lights ceiling light bulb (1) Engine oil (1) Instrument cluster (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos