Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install LED Lights on the GMC Canyon Step

Model: GMC Canyon MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

See other generations:
Video tutorial

If you want to install LED lights on the rear step of your GMC Canyon, gather the parts and T-wrenches in 10 mm and 7 mm sizes. First, remove the step by unscrewing all the screws that hold it in place, as shown in the video.

You can do this manually or use a power drill. Once the step is removed, check if the LED piece fits perfectly into the step itself.

In the video, it does not fit exactly, so you will need to cut a small piece of plastic to allow for proper insertion. Reassemble everything and connect the electrical wire as shown in the video.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Dome Light Bulbs of the GMC Canyon
How to Replace the Dome Light Bulbs of the GMC Canyon
GMC Canyon (2015-2022 / MK 2) This guide provides instructions to remove and replace the bulbs of the interior dome light of the GMC Canyon. First, get in the vehicle and start re…
How to Replace the Remote Battery in a GMC Canyon?
How to Replace the Remote Battery in a GMC Canyon?
GMC Canyon (2015-2022 / MK 2) Replacing the remote battery in a GMC Canyon, as shown in this tutorial, is an extremely simple and inexpensive task. To do this, you will need a rep…
How to Reset the Oil Service Light on a GMC Canyon?
How to Reset the Oil Service Light on a GMC Canyon?
GMC Canyon (2004-2012 / MK 1) In this tutorial, you will see how to reset the oil service light on the GMC Canyon pickup, a very simple and quick operation to perform only after c…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos