Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Canyon
    4. : How to install a grille in place of the GMC Canyon front end

GMC Canyon - Video tutorial

Model: GMC Canyon MK 2 - Years 2015-2022
Part: Checks and maintenance
Operation: How to install a grille in place of the GMC Canyon front end

How to replace the front end of your GMC Canyon with an aggressive chrome grille. We have to remove the whole front by working on the screws that are under the bumper. First, remove the plastic screws that secure the front panel, under the hood, and remove the plastic cover that protects the radiator. We remove the torx screws that protect the grille. From inside the mudguard we have to remove other screws, then the lower 10mm ones. Also on the front of the bumper there are two. We also remove these. Here, now the front comes off in one piece. Now we remove all the pins that enter the frame, very carefully. The new one, very beautiful, can be found on Ebay. Us/mr04/Na. It costs $224.66. Of course, to put it back in place you have to put all the pins back in place, one by one. Reattach the grille to the front and reassemble everything upside down.


Posted on 30 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Gmc Canyon 2015-2022 - What causes the GMC Canyon turn signals problem? Read Answer
    • Gmc Canyon 2015-2022 - What problems does the ignition lock on the GMC Canyon have? Read Answer
    • Gmc Canyon 2015-2022 - What Causes Your 2016 Gmc Canyon Ignition Problem? Read Answer
    • Gmc Canyon 2015-2022 - Why doesn't the ignition key turn on the GMC Canyon? Read Answer
    • Gmc Canyon 2015-2022 - What to do if there is a problem with the ignition cylinder in the GMC Canyon pickup? Read Answer
    • Gmc Canyon 2004-2012 - What problems do the GMC Canyon arrows present? Read Answer
    • Gmc Canyon 2015-2022 - What problems does the GMC Canyon ignition lock have? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos