Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Front Brake Discs and Pads on the GMC Canyon

Model: GMC Canyon MK 1 - Years 2004-2012
Part: Brake rotors

In this guide, follow the main steps to remove and replace the front brake discs and pads on the GMC Canyon. First, lift the vehicle and remove the front wheel; then, unscrew the bolts securing the brake caliper, removing it from the disc, as shown in the video. Next, remove the caliper bracket and unscrew the brake disc bolts using a socket wrench with an extension; then install the new brake disc and the new high-quality pads, following the reverse procedure!

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

GMC Canyon (2015-2022 / MK 2) Replacing the remote battery in a GMC Canyon, as shown in this tutorial, is an extremely simple and inexpensive task. To do this, you will need a rep…
GMC Canyon (2004-2012 / MK 1) Replacing the remote battery in a GMC Canyon, as shown in this tutorial, is an extremely simple and quick task. For this, you will need a small flath…
GMC Canyon (2015-2022 / MK 2) To replace the rear headlight bulb on a GMC Canyon, lower the tailgate to access the screws on the side of the headlight. Once these screws are loose…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos