Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to easily remove the hubcap from a GMC vehicle

Model: GMC GMC Various
Part: Wheel

Video tutorial

How can we remove the hubcap from the wheel of a GMC vehicle, without removing the wheel and especially without damaging the rim and the hubcap itself. Let's avoid using screwdrivers to pry, no matter how small they are, as the hubcaps of this vehicle are snap-on, and to snap on they are provided with many small tabs, which are already fragile on their own, subject as they are to impacts and temperature fluctuations that can damage them.

The youtuber suggests a simple and effective system: a suction cup that we can get, but that we may already have at home. We apply it to the hubcap and pull it forcefully.

And there you have it!


Posted on 18 June 2025 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a GMC
How to Reset the TPMS Light on a GMC
GMC GMC Various To reset the tyre pressure warning light on a GMC vehicle, you need to get inside the vehicle and insert the key into the ignition, turn on the instr…
Where is the Fuse Box on a GMC Safari?
Where is the Fuse Box on a GMC Safari?
GMC GMC Various The fuse box on your GMC Sierra (1996-2005) is located inside the cabin, specifically at the lower part of the dashboard on the driver's side. Below,…
Where is the Fuel Pump Relay Located in a GMC Envoy?
Where is the Fuel Pump Relay Located in a GMC Envoy?
GMC GMC Various This video shows where the fuel pump relay is located in the GMC Envoy and how to proceed if you need to replace it. As shown, the relay is found in …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos