Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Spare Tire from a 2013 GMC Sierra

Model: GMC Sierra MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Wheel

See other generations:
Video tutorial

The spare tire on 2013 GMC Sierra vehicles is located underneath the vehicle. To remove the tire and use it during a replacement, you need an electric screwdriver that will allow you to quickly unscrew the support bolt and drop the tire to the ground.

By disconnecting the cable, you can extract it and mount it on the wheel. If an electric wrench is not available, you can use a hex key to insert into the side bolt and unscrew until you see the tire drop to the ground.

In this case, it should also be disconnected from the cable to be used.


Posted on 30 September 2026 by ScegliAuto


Related tutorials

GMC Sierra (2014-2018 / MK 4) This guide shows how to remove the spare tire from the GMC Sierra Mk4. The spare tire is located under the vehicle's floor while the tools are locate…
GMC Sierra (2019-2026 / MK 5) In this video, see how to remove and replace the wheel with the spare on a fifth-generation GMC Sierra in simple and quick steps. First, grab the jac…
GMC Sierra (2019-2026 / MK 5) In this tutorial, you will learn how to reset the tire light on a GMC Sierra pickup. This operation is extremely simple and quick, and should only be…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos