Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch of the Harley Davidson Road King?

Model: Harley Davidson Road King
Part: Clutch

Video tutorial

To replace the clutch of the Harley Davidson Road King, loosen the screws that secure the cover on the left side of the bike, allowing it to be completely removed: once this panel is off, you can access the underlying components. Here you will find the clutch discs, which need to be freed from their housing by unscrewing the screws that secure the components: this will allow you to insert the new clutch discs, securing them with screws and ensuring everything functions correctly.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Harley Davidson Road King?
How to Replace the Clutch on a Harley Davidson Road King?
Road King To replace the clutch on a Harley Davidson Road King, loosen the screws securing the cover on the left side of the bike so that it can be completely …
How to adjust the clutch of the Harley Davidson Road King
How to adjust the clutch of the Harley Davidson Road King
Road King In this guide, we will see the main instructions on how to adjust the clutch of the Harley Davidson Road King motorcycle. First, we put the motorcycl…
How to Replace the Battery on the Harley-Davidson Road King?
How to Replace the Battery on the Harley-Davidson Road King?
Road King In this tutorial, you can see how to replace the battery on the Harley-Davidson Road King, an extremely simple and quick operation. First, ensure tha…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos