Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we can see how to replace the front headlight on the Harley-Davidson Street 750, a very simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then remove the headlight cover using a 4mm hex key. Then unscrew the two bolts that have just been released with a simple cross-tip screwdriver, separate the headlight from the base, and disconnect the power connector. At this point, all that's left to do is connect the replacement and mount it by simply following the reverse procedure.

Posted on 1 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp of the Harley Davidson Street 750
How to Replace the Front Headlamp of the Harley Davidson Street 750
Street 750 .. and replace the front headlamp of the Harley Davidson Street 750, as well as the 500. First, place your motorcycle on a stand and start by removing.. …
How to disassemble the battery of the Harley Davidson Street 750
How to disassemble the battery of the Harley Davidson Street 750
Street 750 .. and replacing the battery of the Harley Davidson Street 750 motorcycle. First, we put the motorcycle on the stand and start by removing the plastic.. …
Replacing the Battery on the Harley Davidson Street 750
Replacing the Battery on the Harley Davidson Street 750
Street 750 .. to remove and replace the battery of the Harley Davidson Street 750 motorcycle. First, place your motorcycle on the stand and begin removing the plastic.. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos