Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway K Light 202
Part: Tires

Today we will discover the instructions that will allow us to disassemble and replace the tires of the Keeway K-Light 202 motorcycle, in simple and quick steps. First of all, we put the motorcycle on the stand and start lifting the wheel with the stand, either front or rear; then we unscrew the wheel axle and unscrew the brake caliper screws, as shown in the video. At this point, we proceed with the replacement of the tire, installing the appropriate one; then we reassemble the wheel and adjust the chain in case of disassembly of the rear wheel, following the video tutorial until the end!

Posted on 11 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the muffler of the Keeway K-Light 202?
How do you replace the muffler of the Keeway K-Light 202?
K Light 202 .. To replace the exhaust of the Keeway K-Light 202, you need to loosen the screws that attach it to its housing: this will be located near the.. …
How to replace the air filter on the Keeway K-Light 202?
How to replace the air filter on the Keeway K-Light 202?
K Light 202 .. To replace the air filter on the Keeway K-Light 202, loosen the side panel located on the right side of the bike, just below the fuel tank. Once.. …
How do you replace the exhaust pipe of the Keeway K Light 202?
How do you replace the exhaust pipe of the Keeway K Light 202?
K Light 202 .. to replace the exhaust pipe of the Keeway K Light 202, you need to loosen the screws that hold it to the corresponding supports and also unscrew.. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos