Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Removing the engine air filter on a Harley Davidson Electra Glide. Follow this guide to replace it. Position the motorcycle on a central stand, and using a screwdriver, unscrew the fastening screws of the metal cover on the right; remove the cover (as shown in the video). After removing the fastening screws of the container, take out the metal air filter. Install a new filter (if damaged) or reposition the same one after cleaning it (use an air compressor). Finally, close the air filter container and tighten the screws.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Air Filter from a Harley Davidson Electra Glide
Electra Glide Remove the air filter from a Harley Davidson Electra Glide motorcycle. Follow this guide to proceed with the replacement. Position the motorcycle on …
How to Remove the Engine Air Filter from a Harley Davidson Electra Glide
How to Remove the Engine Air Filter from a Harley Davidson Electra Glide
Electra Glide How to remove the engine air filter from a Harley Davidson Electra Glide. Follow this guide to replace it. Position the motorcycle on a workshop stan…
How to Replace the Air Filter on the Harley Davidson Electra Glide
How to Replace the Air Filter on the Harley Davidson Electra Glide
Electra Glide To replace the air filter on the Harley Davidson Electra Glide, you need to loosen the screws that secure the cover of the casing located on the righ…

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos