Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the air filter on the Harley Davidson Electra Glide, you need to loosen the screws that secure the cover of the casing located on the right side of the bike: once these bolts are loosened, you will be able to access the underlying filter. This can be removed from its housing by unscrewing the bolts that secure it in place. Once the old filter has been removed, you can insert the new replacement part, securing it with the appropriate bolts and covering everything with the relevant casing.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Air Filter from a Harley Davidson Electra Glide
Electra Glide Remove the air filter from a Harley Davidson Electra Glide motorcycle. Follow this guide to proceed with the replacement. Position the motorcycle on …
Removing the Engine Air Filter on a Harley Davidson Electra Glide
Removing the Engine Air Filter on a Harley Davidson Electra Glide
Electra Glide Removing the engine air filter on a Harley Davidson Electra Glide. Follow this guide to replace it. Position the motorcycle on a central stand, and u…
How to Remove the Engine Air Filter from a Harley Davidson Electra Glide
How to Remove the Engine Air Filter from a Harley Davidson Electra Glide
Electra Glide How to remove the engine air filter from a Harley Davidson Electra Glide. Follow this guide to replace it. Position the motorcycle on a workshop stan…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos