Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery of the Harley Davidson Nightrod

Model: Harley Davidson Nightrod
Part: Key

Video tutorial

This brief guide will show you how to disassemble and replace the battery of the Harley Davidson Nightrod remote in simple and quick steps. To remove the old battery, lever the side slot to open the casing into two parts, thus accessing the circuit board and the battery; remove the old battery and replace it with a new one of the correct type (in this case a CR 2032 3V), as shown in the video.

At this point, insert the battery in the correct orientation, reassemble the remote; then check its proper functioning.


Posted on 25 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Harley Davidson Nightrod
How to Replace the Air Filter on a Harley Davidson Nightrod
Nightrod To replace the air filter on a Harley Davidson Nightrod, you need to loosen the screws that secure the fuel tank to its housing: these screws are loc…
Replacing the Clutch Oil Reservoir Cover on a Harley Davidson NightRod
Replacing the Clutch Oil Reservoir Cover on a Harley Davidson NightRod
Nightrod Unfortunately, on many models of the Harley Davidson NightRod, the clutch oil reservoir cover can leak lubricant from its container. To replace it, s…
How to Replace the Coolant in a Harley Davidson Night Rod Special
How to Replace the Coolant in a Harley Davidson Night Rod Special
Nightrod In this video tutorial, you will learn how to drain and replace the coolant in the Harley Davidson Night Rod Special. First, place the stand on your …

How to Replace the Clutch on a Royal Enfield Bullet 350

To replace the clutch on your Royal Enfield Bullet 350, loosen the screws securing the cover on the left side of the bike, near the kickstarter. Once you have loosened the screws and removed the cover, you will have access to the underlying components, namely the clutch and the variator. Remove the clutch from its housing by unscrewing the screws that hold it in place and sliding out all the discs that comprise it. After removal, insert the new clutch discs into their housing, securing them all with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos