Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Carburettor from the Harley Davidson Dyna

Model: Harley Davidson Dyna
Part: Carburetor

Video tutorial

Next, we will discover the instructions that will allow us to remove and replace the carburettor of the Harley Davidson Dyna. First, place the motorcycle on its stand and begin by removing the air filter cover by unscrewing the central screw; then remove the air filter from the carburettor by unscrewing its screws, as shown in the video.

At this point, unscrew the screws of the intake manifold to remove the carburettor, disconnecting the throttle and choke cables; clean or replace the carburettor with the new one, making adjustments if necessary.


Posted on 28 May 2026 by ScegliAuto


Related tutorials

How to replace the levers on the Harley Davidson Dyna?
How to replace the levers on the Harley Davidson Dyna?
Dyna To replace the levers on the Harley Davidson Dyna, loosen the nuts that secure them to their housing on the right and left sides of the handlebars. O…
How to Replace the Battery on a Harley Davidson Dyna
How to Replace the Battery on a Harley Davidson Dyna
Dyna To replace the battery on a Harley Davidson Dyna, loosen the screws securing the cover panel located directly under the seat: this panel must be remo…
Removing and Replacing the Battery on a Harley Davidson Dyna
Removing and Replacing the Battery on a Harley Davidson Dyna
Dyna In today's tutorial, you will learn how to remove and replace the battery on a Harley Davidson Dyna. The removal process is very simple and does not …

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos