Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on a Harley Davidson Road Glide

Model: Harley Davidson Road Glide
Part: Instrument cluster

Video tutorial

In this tutorial, you will learn how to remove the instrument cluster on a Harley Davidson Road Glide by following the instructions below. First, unscrew the screws located on the sides of the instrument panel to remove the front plastic cap; then gently pull out the entire instrument cluster, disconnecting the various cables at the back, as shown in the video.

At this point, you will be able to replace the internal bulbs of the instrument panel if necessary; for reassembly, simply reverse the procedure!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Harley-Davidson Road Glide?
How to Set the Time on a Harley-Davidson Road Glide?
Road Glide In this tutorial, see how to set the time on a Harley-Davidson Road Glide, a very simple and quick operation, for example, after disconnecting the ba…
How to adjust the time on the Harley-Davidson Road Glide?
How to adjust the time on the Harley-Davidson Road Glide?
Road Glide In this tutorial, we will see how to adjust the time on the Harley-Davidson Road Glide, a very simple and quick operation to perform, for example, af…
How to replace the spark plugs on a Harley Davidson Road Glide.
How to replace the spark plugs on a Harley Davidson Road Glide.
Road Glide In this guide, we will see the instructions that will allow us to disassemble and replace the spark plugs on a Harley Davidson Road Glide motorcycle.…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos