Do it yourself
Frequently asked questions about cars and motorcycles
In this guide, we will see the instructions that will allow us to disassemble and replace the spark plugs on a Harley Davidson Road Glide motorcycle. First, let's put the motorcycle on the stand and begin by disassembling and removing the fuel tank by disconnecting the fuel lines and the electrical connector. Next, we will remove the spark plug coils, using a socket wrench to unscrew and remove the spark plugs, as shown in the video. At this point, we will install the new spark plugs, ensuring they are the correct type and have the same thread pitch; we will hand-tighten them and then gently tighten with a wrench before finally reassembling the fuel tank.

Posted on 29 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Road Glide In this tutorial, see how to set the time on a Harley-Davidson Road Glide, a very simple and quick operation, for example, after disconnecting the ba…
Road Glide The muffler of the Harley Davidson Road Glide will need to be replaced by loosening the screws that hold it to its housing, on the right side of the …
Road Glide To replace the levers of the Harley Davidson Road Glide, you will need to loosen the screws that secure the components to their housings on the sides…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos