Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on a Harley Davidson Street Bob FXBB 2020

Model: Harley Davidson Street Bob
Part: Engine oil

Video tutorial

In this video tutorial, you will learn how to replace the engine oil and oil filter on a 2020 Harley Davidson Street Bob FXBB. First, remove the right side cover by unscrewing the screws to access the oil cap; then unscrew the drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

At this point, replace the oil filter by hand-tightening the new one (taking care to insert the gasket correctly); all that’s left is to fill the engine with new oil (20W50 recommended)!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on Harley Davidson Street Bob
How to Change the Engine Oil on Harley Davidson Street Bob
Street Bob This guide briefly illustrates how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Harley Davidson Str…
How to change the engine oil in the Harley-Davidson Street Bob?
How to change the engine oil in the Harley-Davidson Street Bob?
Street Bob In this tutorial we can see how to replace the motor oil in the Harley-Davidson Street Bob, an extremely simple and quick operation. First of all, we…
How to Replace the Engine Oil in a Harley-Davidson Street Bob?
How to Replace the Engine Oil in a Harley-Davidson Street Bob?
Street Bob In this tutorial, we will see how to replace the engine oil in a Harley-Davidson Street Bob, an extremely simple and quick operation. First, ensure t…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos