Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on Harley Davidson Street Bob

Model: Harley Davidson Street Bob
Part: Engine oil

Video tutorial

This guide briefly illustrates how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Harley Davidson Street Bob. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge and replace it with a new one, as shown in the video.

Finally, pour in the new oil suitable for your engine, following the specifications indicated in your bike's manual!


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to change the engine oil in the Harley-Davidson Street Bob?
How to change the engine oil in the Harley-Davidson Street Bob?
Street Bob In this tutorial we can see how to replace the motor oil in the Harley-Davidson Street Bob, an extremely simple and quick operation. First of all, we…
How to replace the motor oil in the Harley-Davidson Street Bob?
How to replace the motor oil in the Harley-Davidson Street Bob?
Street Bob In this tutorial we can see how to replace the engine oil in the Harley-Davidson Street Bob, a very simple and quick operation. First of all, we wait…
How to Replace the Engine Oil in a Harley-Davidson Street Bob?
How to Replace the Engine Oil in a Harley-Davidson Street Bob?
Street Bob In this tutorial, we will see how to replace the engine oil in a Harley-Davidson Street Bob, an extremely simple and quick operation. First, ensure t…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos