Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the motor oil in the Harley-Davidson Street Bob?

Model: Harley Davidson Street Bob
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Harley-Davidson Street Bob, a very simple and quick operation. First of all, we wait for the engine to be cold enough, then we place a container underneath the motorcycle, locate the drain hole bolt and unscrew it using a 16mm socket wrench.

We then let all the oil in the system drain out, unscrew the old filter, and tighten both the replacement filter and bolt. At this point, all that's left is to pour in the required amount of oil through the top hole.


Posted on 23 August 2025 by ScegliAuto


Related tutorials

Street Bob .. In this tutorial we can see how to replace the motor oil in the Harley-Davidson Street Bob, an extremely simple and quick operation... …
Street Bob .. the engine oil and oil filter on the Harley Davidson Street Bob. First, place your bike on a stand and start by unscrewing the oil drain bolt located.. …
Street Bob .. see how to replace the engine oil in a Harley-Davidson Street Bob, an extremely simple and quick operation. First, ensure that the engine is cool enough.. …

How to Replace the Engine Oil and Oil Filter of an Aprilia Tuono V4

In this guide, we will see the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter of the Aprilia Tuono V4 motorcycle. First, place the bike on the stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge, replacing it with a new one (screwing by hand and tightening gently), as shown in the video. At this point, top up with new engine oil, bringing the level to the maximum mark.

Watch the video!


by ScegliAuto

More videos