Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Brake Pads on the Harley Davidson Street Bob

Model: Harley Davidson Street Bob
Part: Brake pads

Video tutorial

Today, follow the main steps to remove and replace the rear brake pads on the Harley Davidson Street Bob. First, place the bike on its stand and begin unscrewing the bolts securing the rear brake caliper, removing the central pin to take out the old brake pads, as shown in the video.

At this point, clean any dirt inside the caliper and push the piston back; install the new brake pads in the correct orientation, applying the reverse procedure for reassembly!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Replace the Mirrors on a Harley Davidson Street Bob
How to Replace the Mirrors on a Harley Davidson Street Bob
Street Bob To replace the mirrors on a Harley Davidson Street Bob, you need to loosen the nuts that secure the mirrors to their housing: these nuts will be loca…
How to Replace the Rear Light Bulb on a Harley Davidson Street Bob
How to Replace the Rear Light Bulb on a Harley Davidson Street Bob
Street Bob This guide shows you how to remove and replace the rear light bulb on a Harley Davidson Street Bob in simple steps. First, place your motorcycle on i…
How do you replace the air filter of the Harley Davidson Street Bob?
How do you replace the air filter of the Harley Davidson Street Bob?
Street Bob To replace the air filter of the Harley Davidson Street Bob, you will need to loosen the screws that secure the filter cover housing: it will be loca…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos