Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Indicator Bulb on the Harley Davidson Sportster

Model: Harley Davidson Sportster
Part: Light bulb

Video tutorial

To replace the front indicator bulb on the Harley Davidson Sportster, you need to pry at the bottom of the lens of the headlamp so that it can be completely detached. Once the lens of the optical unit is removed, you will have access to the bulb inside by turning it counterclockwise and pulling it out of its housing.

After it has been removed, you can insert the new bulb by turning it clockwise. Finally, close everything by reinserting the corresponding headlamp lens.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace and Install Indicator Bulbs on a Harley Davidson Sportster
How to Replace and Install Indicator Bulbs on a Harley Davidson Sportster
Sportster Here are brief instructions to replace and install the indicator bulbs on the Harley Davidson Sportster motorcycle. First, start by removing the plas…
How to replace the instrument cluster bulb on the Harley Davidson Sportster?
How to replace the instrument cluster bulb on the Harley Davidson Sportster?
Sportster To replace the instrument cluster bulb on the Harley Davidson Sportster, disconnect the corresponding connector located at the back of the instrument…
How to Replace the Headlight Bulb on a Harley Davidson Sportster?
How to Replace the Headlight Bulb on a Harley Davidson Sportster?
Sportster You can replace the headlight bulb on a Harley Davidson Sportster by loosening the screws that secure the light unit to its housing: these will be lo…

How to Replace the Chain and Sprocket on a Gilera Smt 50

Today, we will discover the main steps to remove and replace the drive chain and sprocket on the Gilera Smt 50. First, place the motorcycle on a stand and begin by removing the rear wheel, disconnecting the drive chain and unscrewing the central axle of the wheel; then unscrew the screws of the sprocket fixed to the rim to remove it and replace it with the new one (having the same tooth count), as shown in the video. At this point, install the new drive chain and the wheel, finally adjusting the chain as per the instructions.

Watch the video!


by ScegliAuto

More videos