Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the engine oil on a Harley Davidson Road Glide, you need to completely remove the protective panel located at the central lower part of the bike to access the drain plug underneath. By unscrewing this drain plug, you can let all the used oil flow into a suitably positioned container until it has completely drained. Next, remove the oil filter from its housing on the left front side of the bike and replace it with a new one. After replacement, top up the oil through the breather located on the left side of the bike.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the muffler of the Harley Davidson Road Glide?
How do you replace the muffler of the Harley Davidson Road Glide?
Road Glide To replace the exhaust pipe of the Harley Davidson Road Glide, you need to loosen the screws that hold it in place on the right side of the motorcycl…
How to replace the motor oil in the Harley-Davidson Road Glide?
How to replace the motor oil in the Harley-Davidson Road Glide?
Road Glide In this tutorial we can see how to replace the engine oil in the Harley-Davidson Road Glide, a very simple and quick operation. First of all, we wait…
How to Change the Engine Oil in the Harley-Davidson Road Glide Special?
How to Change the Engine Oil in the Harley-Davidson Road Glide Special?
Road Glide In this tutorial, you will see how to change the engine oil in the Harley-Davidson Road Glide Special, a very simple and quick operation. First, ensu…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos