Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Harley-Davidson Road Glide?

Model: Harley Davidson Road Glide
Part: Engine oil

Video tutorial

This tutorial shows how to change the engine oil in a Harley-Davidson Road Glide, a very simple and quick operation. First, wait until the engine is cool enough, then position a container underneath the bike, locate the drain hole bolt, and undo it using a 16 mm socket.

Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the bolt. At this point, simply pour the required amount of oil through the designated upper hole.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Harley Davidson Road Glide?
How to Change the Engine Oil on a Harley Davidson Road Glide?
Road Glide .. To replace the engine oil on a Harley Davidson Road Glide, you need to completely remove the protective panel located at the central lower.. …
How to replace the motor oil in the Harley-Davidson Road Glide Special?
How to replace the motor oil in the Harley-Davidson Road Glide Special?
Road Glide .. see how to replace the motor oil in the Harley-Davidson Road Glide Special, an extremely simple and quick operation. First of all, make sure that the.. …
How to Change the Engine Oil in the Harley-Davidson Road Glide Special?
How to Change the Engine Oil in the Harley-Davidson Road Glide Special?
Road Glide .. see how to change the engine oil in the Harley-Davidson Road Glide Special, a very simple and quick operation. First, ensure that the engine is cool.. …

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos