Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Harley Davidson Softail

Model: Harley Davidson Softail
Part: Starter motor

Video tutorial

In this short and simple guide, you will see the steps to remove and replace the starter motor on a Harley Davidson Softail. First, place your motorcycle on a stand and begin by removing the battery, disconnecting both terminals; then unscrew the mounting screws of the starter motor, disconnecting its connector to remove it, as shown in the video.

Now install the new original starter motor, making the connection and testing the engine start, following the video tutorial to the end!


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Oil in a Harley Davidson Softail
How to Replace the Gear Oil in a Harley Davidson Softail
Softail To replace the gear oil in a Harley Davidson Softail, loosen the drain plug located at the bottom centre of the bike. Once the plug is loosened, coll…
How to Replace the Brake Pads on a Harley Davidson Softail
How to Replace the Brake Pads on a Harley Davidson Softail
Softail To replace the brake pads on a Harley Davidson Softail, perform the same operation for both the front and rear calipers: once the calipers are detach…
How do you replace the muffler of the Harley Davidson Softail?
How do you replace the muffler of the Harley Davidson Softail?
Softail To replace the muffler of the Harley Davidson Softail, you need to loosen the screws that secure the exhaust terminal to its housing located near the…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos