Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to remove and replace the front wheel or tyre of a Harley Davidson Street Bob. First, place your motorcycle on a stand and lift the front wheel off the ground; then, unscrew the central axle of the front wheel, subsequently removing the brake caliper from the disc, as illustrated in the video. At this point, remove the front wheel and replace the tyre if necessary; then refit the new front wheel, tightening the central axle to the torque specified in the owner's manual.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Replace the Front Wheel of the Harley Davidson Street Bob
How to Remove and Replace the Front Wheel of the Harley Davidson Street Bob
Street Bob Follow these instructions to remove and replace the front wheel of the Harley Davidson Street Bob motorcycle. First, place the motorcycle on a stand …
Replacing the Rear Brake Pads on the Harley Davidson Street Bob
Replacing the Rear Brake Pads on the Harley Davidson Street Bob
Street Bob Today, follow the main steps to remove and replace the rear brake pads on the Harley Davidson Street Bob. First, place the bike on its stand and begi…
How to Replace the Rear Light Bulb on a Harley Davidson Street Bob
How to Replace the Rear Light Bulb on a Harley Davidson Street Bob
Street Bob This guide shows you how to remove and replace the rear light bulb on a Harley Davidson Street Bob in simple steps. First, place your motorcycle on i…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos