Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Harley Davidson Street Bob

Model: Harley Davidson Street Bob
Part: Battery

Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the battery of the Harley Davidson Street Bob. First, we put the motorcycle on the stand and start by removing the driver's seat; then we unscrew the side screws of the cover, disconnecting both battery terminals (positive and negative), as shown in the video.

At this point we remove the battery from its compartment and replace it with the new one, of the correct type and with the same amperage; we reassemble and connect the battery in the correct way, starting the engine!


Posted on 8 September 2025 by ScegliAuto


Related tutorials

Street Bob Today's main instructions will show you how to remove and replace the battery of the Harley Davidson Street Bob. First, place the bike on its stand a…
Street Bob In this guide, you will learn how to remove and replace the battery on a Harley Davidson Street Bob in simple and quick steps. First, remove the seat…
Street Bob In this tutorial we can see how to replace the front headlight on the Harley-Davidson Street Bob, a very simple and quick operation. First of all, ma…

How to Replace the Engine Oil and Oil Filter of an Aprilia Tuono V4

In this guide, we will see the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter of the Aprilia Tuono V4 motorcycle. First, place the bike on the stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge, replacing it with a new one (screwing by hand and tightening gently), as shown in the video. At this point, top up with new engine oil, bringing the level to the maximum mark.

Watch the video!


by ScegliAuto

More videos