Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight on the Harley-Davidson Street Bob?

Model: Harley Davidson Street Bob
Part: Headlight

Video tutorial

In this tutorial we can see how to replace the front headlight on the Harley-Davidson Street Bob, a very simple and quick operation. First of all, make sure that the key is not inserted, so that you can operate safely, then locate the screw located on the bottom side of the headlight and unscrew it using a cross-tip screwdriver.

Then remove the outer ring, separate the headlight from the support and disconnect the power connector. At this point, all that remains is to connect the replacement and reassemble everything following the exact reverse procedure.


Posted on 30 October 2025 by ScegliAuto


Related tutorials

How to Replace the Headlamp Bulb on a Harley Davidson Street Bob
How to Replace the Headlamp Bulb on a Harley Davidson Street Bob
Street Bob .. and replace the headlamp bulb on a Harley Davidson Street Bob. First, place your motorcycle on a stand and start by removing the metal frame of.. …
How to Replace the Rear Light Bulb on a Harley Davidson Street Bob
How to Replace the Rear Light Bulb on a Harley Davidson Street Bob
Street Bob .. and replace the rear light bulb on a Harley Davidson Street Bob in simple steps. First, place your motorcycle on its stand and move to the rear... …
How to Remove and Replace the Front Wheel of the Harley Davidson Street Bob
How to Remove and Replace the Front Wheel of the Harley Davidson Street Bob
Street Bob .. remove and replace the front wheel of the Harley Davidson Street Bob motorcycle. First, place the motorcycle on a stand and lift the front wheel off the.. …

How to Change the Engine Oil in the Yamaha MT-15?

In this tutorial, you will learn how to change the engine oil in the Yamaha MT-15, a very simple and quick operation. First, ensure that the engine is cool enough. Then, position a container beneath the motorcycle, locate the drain bolt, and loosen it using a socket spanner. Allow all the oil in the system to drain out. Next, open the filter cap and insert the replacement. Finally, reassemble everything and pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos