Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Follow these instructions to remove and replace the front wheel of the Harley Davidson Street Bob motorcycle. First, place the motorcycle on a stand and lift the front wheel off the ground using the appropriate stand; then, unscrew the bolts securing the brake caliper, removing it from the disc, as shown in the video. At this point, unscrew the central axle of the wheel, removing it from the fork; if necessary, replace the tyre and reassemble everything by applying the reverse procedure!

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Wheel of a Harley Davidson Street Bob
Removing the Front Wheel of a Harley Davidson Street Bob
Street Bob In this video tutorial, you will learn how to remove and replace the front wheel or tyre of a Harley Davidson Street Bob. First, place your motorcycl…
How to Replace the Mirrors on a Harley Davidson Street Bob
How to Replace the Mirrors on a Harley Davidson Street Bob
Street Bob To replace the mirrors on a Harley Davidson Street Bob, you need to loosen the nuts that secure the mirrors to their housing: these nuts will be loca…
How to Replace the Battery on a Harley Davidson Street Bob
How to Replace the Battery on a Harley Davidson Street Bob
Street Bob In this guide, you will learn how to remove and replace the battery on a Harley Davidson Street Bob in simple and quick steps. First, remove the seat…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos