Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Engine Warning Light on a Harley Davidson Sportster 1200

Model: Harley Davidson Sportster 1200
Part: Warning light – error code

Video tutorial

Today's guide will show you how to reset the engine warning light on a Harley Davidson Sportster by following these simple steps. To reset the engine warning light, you must have resolved the issue that caused the light to come on; therefore, place the motorcycle on its stand and press the left light button, then turn on the ignition by turning the key to position one, as shown in the video.

At this point, you will see the diagnostic and control unit message appear on the display, which will be reset to clear the engine warning light.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Harley Davidson Sportster 1200
Sportster 1200 The steps outlined in this guide will show you how to remove and replace the battery of the Harley Davidson Sportster 1200 motorcycle. First, place t…
How to Change the Engine Oil in the Harley-Davidson Sportster 1200?
How to Change the Engine Oil in the Harley-Davidson Sportster 1200?
Sportster 1200 In this tutorial, you will see how to change the engine oil in the Harley-Davidson Sportster 1200, a very simple and quick operation to perform every…
How to Change the Engine Oil on a Harley Davidson Sportster 1200
How to Change the Engine Oil on a Harley Davidson Sportster 1200
Sportster 1200 In today's tutorial, you will learn how to change the engine oil and oil filter on a Harley Davidson Sportster 1200. First, place your bike on a stan…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos