Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to change the engine oil in a Harley-Davidson Road King, a very simple and quick operation. First, wait until the engine is cool enough, then position a container beneath the bike, locate the drain plug, and unscrew it using a 6mm hex key. Allow all the oil in the system to drain out, then unscrew the old filter using pliers and tighten the replacement. At this point, reassemble everything and pour in the new oil through the upper hole.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Harley Davidson Road King
How to Change the Engine Oil and Oil Filter on a Harley Davidson Road King
Road King .. the routine maintenance service on a Harley Davidson Road King. First, unscrew the oil drain bolt located under the engine using a socket spanner,.. …
How do you replace the motor oil of the Harley Davidson Road King?
How do you replace the motor oil of the Harley Davidson Road King?
Road King .. To replace the motor oil of the Harley Davidson Road King, you will need to loosen the drain plug of the oil tank: this plug will be located.. …
How to Change the Engine Oil in a Harley-Davidson Road King
How to Change the Engine Oil in a Harley-Davidson Road King
Road King .. In this tutorial, you will see how to change the engine oil in a Harley-Davidson Road King, a very simple and quick operation. First,.. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos