Do it yourself
Frequently asked questions about cars and motorcycles
To change the engine oil on a Harley Davidson Touring, loosen the drain plug located at the bottom of the bike's oil tank. Once this is unscrewed, allow all the used oil to flow into a suitably positioned container until it has completely drained. After collecting the oil, remove the oil filter from the housing on the right side of the bike and replace it with a new one. After replacement, pour the new oil through the breather located on the right side of the bike.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Touring You can change the engine oil of the Harley Davidson Touring by unscrewing the drain plug of the oil sump located at the central lower part of the ve…
Touring To change the engine oil of the Harley Davidson M8 Touring, loosen the drain plug of the oil sump, which is positioned at the bottom of the vehicle: …
Touring In this tutorial, you will see how to change the engine oil in a Harley-Davidson Touring, a very simple and quick operation. First, wait until the en…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos