Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the air filter on a Harley Davidson Street Bob, use a tool to pry off the chrome cover of the filter box located on the right side of the bike. Once the cover is removed, you will see the underlying filter, which must be taken out of its housing by loosening the screws that secure it in place. After removal, insert the new replacement part, securing it properly with the screws and covering everything with the cover; after installation, ensure that everything functions correctly.

Updated on 15 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Harley Davidson Street Bob?
How do you replace the air filter of the Harley Davidson Street Bob?
Street Bob To replace the air filter of the Harley Davidson Street Bob, you will need to loosen the screws that secure the filter cover housing: it will be loca…
How to Replace the Air Filter on the Harley Davidson Street Bob
How to Replace the Air Filter on the Harley Davidson Street Bob
Street Bob You can replace the air filter on the Harley Davidson Street Bob by loosening the screws that secure the cover of the filter box, located on the righ…
How to Change the Engine Oil on Harley Davidson Street Bob
How to Change the Engine Oil on Harley Davidson Street Bob
Street Bob This guide briefly illustrates how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Harley Davidson Str…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos