Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to change the engine oil in a Harley-Davidson 883, a very simple and quick operation to perform every 12 months. First, ensure the engine is cold enough, then position a container under the bike, open the filler cap, and, loosening the relevant clamp, disconnect the indicated lower hose. Allow all the oil in the system to drain out, unscrew the old filter using the appropriate tool, tighten the replacement, and reconnect the hose. Finally, pour in the new oil through the designated hole.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the motor oil in the Harley-Davidson 883 Iron?
883 .. see how to replace the motor oil in the Harley-Davidson 883 Iron, an extremely simple and quick operation. First of all, make sure that the engine is.. …
How to replace the front headlamp on a Harley-Davidson 883?
How to replace the front headlamp on a Harley-Davidson 883?
883 .. how to replace the front headlamp on a Harley-Davidson 883, a very simple and quick operation. First, ensure the key is not inserted for safety, then.. …
How to Replace the Rear Suspension on a Harley Davidson 883
How to Replace the Rear Suspension on a Harley Davidson 883
883 .. Before you begin, lift your Harley Davidson 883. Start by unscrewing and removing the upper bolt that secures the suspension to the upper.. …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos