Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Harley-Davidson Road Glide?

Model: Harley Davidson Road Glide
Part: Headlight

Video tutorial

In this tutorial, you will see how to replace the front headlight on a Harley-Davidson Road Glide, a very simple and quick operation. First, ensure that the key is not inserted.

Then, remove the windscreen, take off the speaker covers, and unscrew all the indicated screws. Next, remove the side indicators, separate the front fairing from the frame, and unscrew the four bolts securing the headlamp.

Finally, remove the headlamp from its bracket, disconnect the power connector, and fit the replacement by following the reverse procedure.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Harley-Davidson Road Glide?
How to Set the Time on a Harley-Davidson Road Glide?
Road Glide .. tutorial, see how to set the time on a Harley-Davidson Road Glide, a very simple and quick operation, for example, after disconnecting the battery.. …
How to adjust the time on the Harley-Davidson Road Glide?
How to adjust the time on the Harley-Davidson Road Glide?
Road Glide .. we will see how to adjust the time on the Harley-Davidson Road Glide, a very simple and quick operation to perform, for example, after disconnecting the.. …
How to Remove the Instrument Cluster on a Harley Davidson Road Glide
How to Remove the Instrument Cluster on a Harley Davidson Road Glide
Road Glide .. how to remove the instrument cluster on a Harley Davidson Road Glide by following the instructions below. First, unscrew the screws located on the sides.. …

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos