Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Bulb on the Holden Barina Spark

Model: Holden Barina Spark MK 1 - Years 2009-2015
Part: Headlight bulb

If you need to replace a bulb on this vehicle, you can find the information and instructions on how to proceed in the description below. After opening the hood, locate the headlight assembly where the bulb needs to be replaced. Remove the rubber cover located behind the headlight assembly and identify and extract the burnt-out bulb. Take the new bulb and insert it into the socket, then reposition the bulb in its housing. Finally, reinstall the rear cap of the headlight.

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Find the OBD Port on the Holden Barina Spark
How to Find the OBD Port on the Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) The Holden Barina Spark is a vehicle that is not imported to Europe. It is a popular car in Australia, and like all cars from that part of the world,…
How to Replace the Alternator on the Holden Barina Spark?
How to Replace the Alternator on the Holden Barina Spark?
Holden Barina Spark (2009-2015 / MK 1) To replace the alternator on the Holden Barina Spark, open the hood to access the components inside the engine compartment. You will need to remove a…
How to Replace the Cabin Air Filter for the Holden Barina Spark
How to Replace the Cabin Air Filter for the Holden Barina Spark
Holden Barina Spark (2009-2015 / MK 1) This guide shows how to replace the cabin air filter for the Holden Barina Spark. To access the filter compartment, you need to remove the glove box;…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos